This laboratory has the ability to test materials for molding and casting metals, muscle and input materials. In the first group, sand gravel measurements, moisture content, soil percentages, strength and sand flowability are possible, which are the basis for the preparation of moss sandblasting materials. In the second group, tests are performed on the preparation of a standard muscle sample and flexural strength of the muscle. In the control part of the input material, the ADV is measured, the titration test, the PH measurement, and so on.

Sandstone laboratory equipment:

Moisture meter
Sartorius Digital Scale
Measuring tensile strength of sand
Universal machine measures the shear strength, bending and compression of the sand and muscle
A mini-cold muscle testing machine, including stirrer and shot and gas injection
5 kg silica sand mixer for mixing sand with resin or bentonite
Roughness measurement device
Gap strength measurement device
Sand blasting machine
that
Heat treatment furnace
Electric mixer
Siphon sand for measuring fine material
Sartorius sand marking machine
Methylene blue metering machine
Complete sieve series for measuring AFS sand and other materials

Sand tests:

Measuring the moisture content of the sand
PH measurement
Measuring the compressibility of the sand
Measuring the Methylene blue intake
Measuring AFS sand
Sieve measurements for input materials including coal powder, bentonite, graphite and …
ADV measurement
Measuring fine materials
Measuring the percentage of active bentonite, volatile matter and combustible materials
Measuring tensile strength
Measuring tensile strength and dry sand
Determination of tenacity strength